Liquid-packed ring-type vacuum pumps

Depending on material of inner flowing part designed for pumping (creation of vacuum ) of air, inert or aggressive gases, insoluble in water, to produce or maintain vacuum. Operating medium - water.

Application: chemical, ore mining and smelting industry, food industry, pulp and paper industry, agriculture, construction and medicine.

Main advantage of pumps - easy operation and maintenance. Pumps consist of small quantity of parts. They have no special system for lubrication and oil pumps. All clearances between rotor and static casing are sealed with operating medium. Simplicity of construction, no friction pairs in inner flowing part provide reliability and service life of pump operation.

Specification

    Pump type     Capacity
as per initial
conditions,
m3/min
Pressure Water
consumption,
l/s
Consumed
power,
kW
Rotational
speed
(sync.),
rpm
Overall dimensions
of pump without motor,
mm
Mass of pump
without drive,
kg
initial, MPafinal, MPa
VVN-12/0.4120.040.1013 0.4018.40 1000 1250 x 500 x 600390
VVN1-12TM120.040.1013 0.4018.60 1000 1250 x 500 x 600300
VVN-25/0.4250.040.1013 0.8737.10 750 1450 x 680 x 720720
VVN2-50/0.2N450.020.1013 1.2963.00 600 1605 x 770 x 820930
VVN1-50TM500.040.1013 1.3070.00 600 1750 x 800 x 900920
VVN2-50M52.50.020.1013 1.2270.80 600 1750 x 850 x 9001350
VVN2-50H450.020.1013 1.3063.00 600 1750 x 800 x 9001100
VVN2-50N450.020.1013 1.3063.00 600 1750 x 800 x 9001100
VVN1-150N1500.040.1013 6.60204.00 300 2600 x 1400 x 14005000
VVN2-150M1500.020.1013 6.10180.00 300 2560 x 1300 x 14005850
DVVN-150B1500.040.1013 11.75187.50 186 2725 x 1860 x 18508200
VVN2-3003400.020.1013 13.27401.43 250 3200 x 1800 x 195012500

Note: M - modernized, B - for paper industry, H - chemically resistant modification
Pump inner flowing part is made of: N - of stainless steel, T - of titanium.

Main   |   Production   |   Production Potentialities   |   Quality system   |   Contact us