Condensate pumps

Condensate pumps are designed for feed of turbine waste steam condensate, condensate of heating steam from heat exchangers of NPP power units and liquids similar to condensate on viscosity and chemical characteristics.

According to design modifications pumps KsVA 900-180, KsVA 1000-190, KsVA 2200-100, KsVA 2200-170-1 are of centrifugal, vertical, double casing and multi staged type. They provide stable head at parallel operation of pumps and deficiency of air leak through operative and inoperative pump. Pumps are rated for operation with minimal available positive suction bead in vacuum at inlet at condensate temperature close to saturation temperature. To improve anticavitation characteristics before the first stage impeller it is installed booster impeller.

Pumps  KsVA 1500-240 are centrifugal, horizontal, single stage with double-entry impeller. Designed for feed of condensate to deaerator.

Pump casing is cast with semi-spiral feed and double-volute discharge,horizontally splitted. Pump suction and discharge nozzles located in casing bottom part are directed into different sides perpendicular to pump rotation axis.

Specification

Pump type Capacity,
m3/h
Head, m Rotational
speed (sync.), rpm
Motor
power, kW
Pump overall dimensions,
mm
Pump mass,
kg
KsVA 900-180 900 180 1500 1000 1625 x 1700 x 5435 12760
KsVA 1000-190 1040 190 1500 1000 1800 x 1700 x 5435 12760
KsVA 1500-120 1500 120 750 1000 2200 x 3200 x 7875 12315
KsVA 1500-120-1 1850 95 750 800 2185 x 2100 x 5225 20900
KsVA 1500-120A 1850 95 750 1000 2200 x 3200 x 6110 22000
ĘņA 1500-240-2 1500 240 3000 1600 4810 x 1800 x 1685 8750
ĘņA 1500-240-2A 1850 170 3000 1600 4810 x 1800 x 1685 8750
KsV 2200-100 2200 100 1500 1000 1895 x 1960 x 6210 18360
AKsVA 2200-170-1 2200 170 1500 1600 1960 x 2100 x 7165 18250
AKsVA 1500-120-2 1850* 95* 750 800 2100 x 2277 x 5383 21100
AKsVA 2200-220-1   2200* 211* 1500 2000 2309 x 2684 x 6805 23400

Main   |   Production   |   Production Potentialities   |   Quality system   |   Contact us