JSC Sumy Frunze NPO

Cradle-mounted chemical pumps

Designed for pumping of chemically active and neutral medium with hydrogen index pH 4...9 and temperature up to 70°C (for supply of oil, oil light products, chemically active and slightly aggressive liquids which may cause corrosion of pump inner flowing part material not more than 0.1 mm/year, and neutral liquids).

Pumps, inner flowing part of which is made of titanium, are designed for pumping of liquids with hydrogen index pH=2. Such pumps are applied in chemical, food, oil refining industries.

Design features:

centrifugal cradle-mounted single stage pumps with horizontal shaft and one-side axial water feed to impeller and vertical discharge;
impeller design provides maximal rotor load relief of axial force;
axial force arisen during wearing is compensated by mounting group;
rolling bearings work like supports;
shaft sealing - end sealing or sealing with soft packing gland;
pump unit can be equipped with any type of electric motor which parameters and modification meet operating conditions;
bearing lubrication - liquid or consistent grease;
in pumps with liquid grease control of oil level in crankcase mounting group is provided with constant level lubricator.

Specification

Pump type Capacity,
m³/h Head,
m Rotational
speed
(sync.),
rpm Motor
power,
kW Overall
dimensions,
mm Mass,
kg

HME 25-20-140 A, K 2 25 3000 1.1 18/21 189/229 x 215 x 240

H 50-32-125 D, K 12.5/6.3 20/5 3000/1500 2.2/0.37 51 455 x 230 x 252

H 50-32-160 D, K 12.5 32 3000 5.5 56 465 x 276 x 297

H 50-32-200 D, K, A 15/12.5 50 3000 5.5 88.4 465 x 276 x 340

H 50-32-200 A 6.3 12.5 1500 0.55 88 415 x 285 x 370

H 65-40-200 D, K 30 50 3000 15 90.5 485 x 265 x 340

AH 65-40-200 K 30 50 3000 11 68 485 x 283 x 368

H 65-40-250 D, K 25 80 3000 11 87 600 x 340 x 405

H 65-40-315 K 12.5 32 1500 7.5 98.6 500 x 405 x 450

AH 65-40-315 K 25 125 3000 30 130 657 x 405 x 504

H 65-50-160 D, K 25 32 3000 5.5 62 465 x 270 x 297

H 80-65-160 D, K 50 32 3000 15 64 485 x 290 x 340

H 80-50-200 D, K 50 50 3000 15 95 485 x 300 x 360

H 80-50-250 D, K 50/25 80/20 3000/1500 15/5.5 96 625 x 320 x 405

H 80-50-315 K 50/25 125/32 3000/1500 45/11 112 625 x 406 x 505

HE 80-50-315 D 25 32 1500 11 113 660 x 540 x 406

H 100-65-160 D, K 100 32 3000 15 88 600 x 280 x 360

H 100-65-200 D, K 100 50 3000 45 89 600 x 405 x 370

H 100-65-250 D, K 100/50 80/20 3000/1500 55/11 97 625 x 360 x 450

H 100-65-315 K 100/50 125/32 3000/1500 110/11 120 665 x 400 x 505

HE 100-65-315 D 50 32 1500 11 124 625 x 400 x 505

H 125-80-200 D 160 50 3000 45 95 625 x 365 x 430

H 125-100-400 K 125 50 1500 37 212 710 x 510 x 673

H 150-125-400 D, K 200 50 1500 55 204 670 x 555 x 715

H 200-150-315 A, K 315 32 1500 55 230 830 x 550 x 715

H 200-150-315 T 315 32 1500 55 155 830 x 550 x 715

H 200-150-400 D, K 400 50 1500 90 310 830 x 590 x 765

H 200-150-400 A 315 50 1500 75 272 830 x 550 x 765

H 200-150-400 T 315 50 1500 75 180 830 x 550 x 765

H 250-200-315 A 500 32 1500 90 370 890 x 550 x 715

H 250-200-315 T 500 32 1500 90 250 890 x 550 x 715

Notes: Pump inner flowing part is made of:
D - steel 20H13,
K - chrome and nickel steel 12H18N10T,
T - titanium alloy VT1-0,
A - carbon steel.
Motor power can be changed depending on pumping medium.
Seals may be of 3 types: SD - doubled gland seal, 5 - single end seal, 55 - doubled end seal.

Main | Production | Production Potentialities | Quality system | Contact us

Pump type	Capacity, m³/h	Head, m	Rotational speed (sync.), rpm	Motor power, kW	Overall dimensions, mm	Mass, kg
HME 25-20-140 A, K	2	25	3000	1.1	18/21	189/229 x 215 x 240
H 50-32-125 D, K	12.5/6.3	20/5	3000/1500	2.2/0.37	51	455 x 230 x 252
H 50-32-160 D, K	12.5	32	3000	5.5	56	465 x 276 x 297
H 50-32-200 D, K, A	15/12.5	50	3000	5.5	88.4	465 x 276 x 340
H 50-32-200 A	6.3	12.5	1500	0.55	88	415 x 285 x 370
H 65-40-200 D, K	30	50	3000	15	90.5	485 x 265 x 340
AH 65-40-200 K	30	50	3000	11	68	485 x 283 x 368
H 65-40-250 D, K	25	80	3000	11	87	600 x 340 x 405
H 65-40-315 K	12.5	32	1500	7.5	98.6	500 x 405 x 450
AH 65-40-315 K	25	125	3000	30	130	657 x 405 x 504
H 65-50-160 D, K	25	32	3000	5.5	62	465 x 270 x 297
H 80-65-160 D, K	50	32	3000	15	64	485 x 290 x 340
H 80-50-200 D, K	50	50	3000	15	95	485 x 300 x 360
H 80-50-250 D, K	50/25	80/20	3000/1500	15/5.5	96	625 x 320 x 405
H 80-50-315 K	50/25	125/32	3000/1500	45/11	112	625 x 406 x 505
HE 80-50-315 D	25	32	1500	11	113	660 x 540 x 406
H 100-65-160 D, K	100	32	3000	15	88	600 x 280 x 360
H 100-65-200 D, K	100	50	3000	45	89	600 x 405 x 370
H 100-65-250 D, K	100/50	80/20	3000/1500	55/11	97	625 x 360 x 450
H 100-65-315 K	100/50	125/32	3000/1500	110/11	120	665 x 400 x 505
HE 100-65-315 D	50	32	1500	11	124	625 x 400 x 505
H 125-80-200 D	160	50	3000	45	95	625 x 365 x 430
H 125-100-400 K	125	50	1500	37	212	710 x 510 x 673
H 150-125-400 D, K	200	50	1500	55	204	670 x 555 x 715
H 200-150-315 A, K	315	32	1500	55	230	830 x 550 x 715
H 200-150-315 T	315	32	1500	55	155	830 x 550 x 715
H 200-150-400 D, K	400	50	1500	90	310	830 x 590 x 765
H 200-150-400 A	315	50	1500	75	272	830 x 550 x 765
H 200-150-400 T	315	50	1500	75	180	830 x 550 x 765
H 250-200-315 A	500	32	1500	90	370	890 x 550 x 715
H 250-200-315 T	500	32	1500	90	250	890 x 550 x 715